The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
44
407
Speed to block the counting of the tariff:
this is the speed above which the taximeter stops counting the tariff. As soon as the speed becomes less than this
threshold the taximeter continues counting the tariff again. Normally the value programmed here is a high speed like for example 140 Km/h. The speed is given in Km/h
with an accuracy of 1 Km/h. The allowed value goes from 0 (min) to 255 (max). The value 0 is a special case. It means: disabled.
0-255
408
Block number if from Stopped back to Hired:
this is the number of the block that will be used when passing from Stopped back to Hired.
The allowed value goes from 0 (min) to 62 (max).
0 – 62
409
Block number if from Stopped to ForHire:
this is the number of the block that will be used when passing from Stopped to ForHire.
The allowed value goes from 0 (min) to 62 (max).
0 - 62
AUTO TEST
410
Number of next block with key K1 delayed:
this is the number of the next tariff-block to be used when key K1 is kept pressed for about a second.
The allowed value goes from 0 (min) to 62 (max).
0 - 62
411
Distance for autotest:
this is the distance with which the vehicle is calibrated. The distance is given in metres with an accuracy of 1 metre.
The allowed value goes from 0 (min) to 9999 (max).
0
-
9999
meters
412
Statistical memories chosen to be print ed out (value 0= print all from 1 to 16)
1-65535
413
Statistical memories chosen to be print ed out (value 0= print all from 17 to 20)
1-65535
414
NOT USED for F2 Plus
1-65535
from Q 415 / Available for any custom parameter / to Q 423
424
Time to block the keys in stopped position:
from 1 to 127 : Seconds to block the Keyboard when the taximeter pass from Hired -> Stopped
+128 : At any key pressure show the word BLOC
+256 : During the Keys block the OP key is excluded (it will continue to operate)
+512 : During the Keys block the K1 key is excluded (it will continue to operate)
+1024 : During the Keys block the K2 key is excluded (it will continue to operate)
+2048 : During the Keys block the K3 key is excluded (it will continue to operate)
+4096 : During the Keys block the K4 key is excluded (it will continue to operate)
+8192 : Special condition. The time counting starts from the beginning of the
receipt printing, then the taximeter go to For-Hire and keep freezed the
amount on the display while the time programmed don't expire.
Also is not possible to start a new trip for the time programmed.
+16384 : When the time expires the taximeter goes automatically to For-Hire position
+32768 : press OP during block to automatically go ForHire when timer expires
1-65535
from Q 425 / Available for any custom parameter / to Q 429
