Page 8 of 35
OSD Functions
Image
Brightness
Increase/decrease brightness level.
Press – or + (- + ) Total : 100 steps
Contrast
Increase/decrease contrast level.
Press – or + (- + ) Total : 100 steps
Sharpness
Increase/decrease sharpness level.
Press – or + (- + ) Total : 8 steps
Color
Auto : Auto RGB Calibration ([See appendix IV] in details)
(Function in ARGB mode only)
Color temp
4
(Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.
Function in ARGB mode only)
4200k
5000k
6500k
7500k
9300k
User
4
R Press – or + (- + ) Total : 100 steps
G Press – or + (- + ) Total : 100 steps
B Press – or + (- + ) Total : 100 steps
Reset
Gamma (0.4/0.6/1.0/1.6/2.2)
Display (Function in ARGB mode only)
Auto Adjust
Auto adjust the positions, phase, frequency
Phase
Fine tune the data sampling position (adjust image quality)
Press – or + (- + ) Total : 100 steps
Clock
Adjust the image horizontal size
Press – or + (- + ) Total : 100 steps
Display Position
Adjust image position
Sound
(Function when HDMI, Display Port, SDI connected and selected)
Volume
Increase/decrease volume level, total: 100 steps
Press – or + (- + ) Total : 100 steps
Mute
Mute
Output
Select audio output port
Speakers : via CN1 & J1 connector
SPDIF : via CN11 connector
System
4
Input source select
Input : Select the input video signal
Display
Port
VGA
DVI/HDMI
SDI
Autoscan : Enable the Auto source seek function
OSD menu
Timer : OSD Timeout in seconds
3
sec
6
sec
12
sec
Always On
Rotation : OSD menu rotation in degree
0
90
180
270
