Page 2 of 35
Introduction
Designed for LCD monitor and other flat panel display applications, ALR-1920-SDI is the single board solution for
supporting ARGB, HDMI, Display Port, SDI input controller for driving the panel up to 1920x1200 resolution. This
controller is the combo version for ALR-1920 and HD-3000S. This product design for the monitor series :
¾
TFT (active matrix) LCDs with LVDS interface of 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1400x1050,
1440x900, 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600, 800x600, 800x480, 640x480, 480x640
resolution
¾
Support HDMI, VGA, Display port, SDI input
¾
Support ARGB signal up to WUXGA resolution.
¾
Support HDMI 1.3 input up to 1080p/WUXGA resolution.
¾
Support single-link Display Port 1.1a
¾
Support 1.5Gbits & 3Gbits bit rate SDI input signal support
¾
SDI re-clock loop through output.
¾
Support LVDS interface panel
HOW TO PROCEED
¾
Ensure you have all parts & that they are correct, refer to:
•
Connection diagram (separate document for each panel)
•
Connector reference (in following section)
•
Assembly
notes
¾
Check controller switch & jumper settings (errors may damage the panel)
¾
Prepare the PC
¾
Connect the parts
¾
Understand the operation and functions (in following section)
IMPORTANT USAGE NOTE
This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or
injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this
product to:
¾
Ensure that all necessary and appropriate safety measures are taken.
¾
Obtain suitable regulatory approvals as may be required.
¾
Check power settings to all component parts before connection.
¾
Understand the operation and connectivity requirements of this controller.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
