digitalview ALR-1920-SDI, Instructions Manual

Page: 28 / 36

Page 28 of 35
nnnn | “+” | “-“ |
“?” value/increment/decrement
Query (In ARGB mode only)
OSD H position 0x90,
nnn | “+” | “-“ | “r” |
“R” | “?” Set osd_hpos =
value/increment/decrement
Reset
Query OSD horizontal position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
OSD V position 0x91,
nnn | “+” | “-“ | “r” |
“R” | “?” Set osd_vpos =
value/increment/decrement
Reset
Query OSD vertical position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
Select menu
timeout 0x93,
nn | “+” | “-“ | “r” |
“R” | “?” Select menu timeout =
value/increment/decrement
Reset
Query OSD menu timeout value.
“00” – Continuous.
Value – Round up to nearest
available step.
If value > max available step, set
it to the max available step.
“0” “0” – Always On.
“0” “C” – 12 seconds (Default)
“0” “6” – 6 seconds
“0” “3” – 3 seconds
Input main select
* Function in Valid
mode only 0x98,
nn | “+” | “-“ | “r” |
“R” | “?” Select input main =
PC or video or next available
Reset
Query Main selected.
“0x41,0x31” ARGB (Default)
“0x45,0x31” HDSDI
“0x48,0x31” HDMI
“0x50,0x31” Display Port
GAMMA value
select 0x9d,
n |
“r” | “R” |
“?”
Select GAMMA value =
Value
Reset
Query GAMMA value:
“0” – 0.4,
“1” – 0.6
“2” – 1.0 (Default),
“3” – 1.6
“4” – 2.2
Colour
temperature select 0xb3,
n |
“r” | “R” |
“?” Select colour temperature =
value
Reset
Query Main selected.
“0” – user defined RGB values.
“1” – 4200K.
“2” – 5000K.
“3” – 6500K.
“4” – 7500K. (Default)
“5” – 9300K.
Red level for
selected colour
temperature 0xb4,
nn | “+” | “-” |
“r” | “R” |
“?” Set the level of the red channel
for the selected colour temp. =
value/increment/decrement
Reset
Query Red level for selected colour
temperature.
Range: “0””0”-“6””4”
Default: “6””4”
Green level for
selected colour
temperature 0xb5,
nn | “+” | “-” |
“r” | “R” |
“?” Set the level of the green
channel for the selected colour
temp. =
value/increment/decrement
Reset
Query Green level for selected colour
temperature.
Range: “0””0”-“6””4”
Default: “6””4”
Blue level for
selected colour
temperature 0xb6,
nn | “+” | “-” |
“r” | “R” |
“?” Set the level of the blue channel
for the selected colour temp. =
value/increment/decrement
Reset
Query Blue level for selected colour
temperature.
Range: “0””0”-“6””4”
Default: “6””4”
Backlight
brightness control 0xe0,
nn | “+” | “-” |
“r” | “R” |
“?” Set backlight brightness =
value/increment/decrement
Reset
Query Backlight brightness.
Range: “0””0”-“F””F”
Default: “F””F”
e.g “1””0”
Æ
0xe0 0x31 0x30
* This control can only function
when JB5 sets 3-4 closed