Manual
NB IoT Smart Access LDK400
Page
2
of
38
About This Manual
Copyright 2018 by LEAPIN Digital Keys Pty Ltd.
2/11 York Street, Sydney, Australia 2000
Telephone: +
+44 1706 577 991
https://www.digitalkeys.io/
Edition: 20191303
Version: 1.0
Document number:
LDK400_1.0.DOCX
This issue replaces all previous issues. All previous issues are invalid. The information in this
manual can be changed without prior notice.
Passing on or copying this document, using and providing information on its contents is
prohibited unless expressly permitted. Infringements shall be subject to compensation
claims. All rights reserved in the case of patent award or listing of a registered design.
The arrangement of information for this document is to the best of our knowledge and belief.
LEAPIN Digital Keys assumes no guarantee for the accuracy or completeness of the contents of
this document. In particular, LEAPIN Digital Keys cannot be made liable for consequential
damages which are due to erroneous or incomplete information. As mistakes can be made
despite our best possible efforts, we would be very thankful for any corrections which you may
find necessary.
Safety and warning instructions
•
This manual outlines the commissioning, installation and operation of a NB IoT Smart
access control solution LDK400 model.
•
This equipment may only be used for the purpose specified by the manufacturer.
•
This manual should be kept accessible.
•
Illegal changes and the use of spare parts as well as accessories that have not been
sold or recommended by the manufacturer of this unit can cause fires, electric shocks
and injuries. Such measures lead to an exclusion of liability, and the manufacturer
accepts no responsibility.
•
Repairs may only be carried out by the manufacturer or accredited distributor/re-seller.
•
Basis for the guarantee of the manufacturer is the version of the warranty policy for the
unit at the time of purchase. No liability is accepted for inappropriate, incorrect manual or
automatic setting of the parameters for the device, or its improper use.
•
The distributor/re-seller in conjunction with the lock purchaser (if required), is responsible
for ensuring that the device is assembled and mounted according to the recognised
technical guidelines as well as other valid regulations in the country of use