IPEXCB Quick Install Guide
Important notice:
•
Do not attempt to disassemble or alter the housing. There are no user-serviceable parts
inside the unit. Doing so will void your warranty.
•
To minimize the possibility of equipment damage from electrostatic discharge (ESD), all source and destination
equipment must be powered off during installation.
•
Do not connect the device to a telecommunication outlet wired to unrelated equipment. Doing so may
damage the unit or any connected equipment. Ensure all connected twisted pair cabling is straight-through (point-
to-point).
•
Allow proper ventilation to reduce the risk of thermal failure.
This guide is for quick installation only.
For complete Digitalinx IP Deployment Guide go to
www.libav.com
or use a
QR reader to access the manual via QR code below.
Scan QR Code with your Smart-phone or Tablet
