Routing Video Signals
Using the web GUI, video signals can be routed from DigitalinxIP encoders (TX) to decoders
(RX) using the
SCENES
menu
.
When the
SCENES
menu is highlighted, click on
ALL DEVICES
,
this will show all of the active DigitalinxIP encoders and decoders on the A/V network
switch as well as four submenus labeled
MATRIX, SCENE1, SCENE2, and SCENE3.
NOTE:
By default encoders (TX) and decoders (RX) aliases are assigned in the system based
on the following;
[MANUFACTURER PART NUMBER-MAC ADDRESS]
Example
;
IPEX2002-341B22802204
IPEX2002
is the manufacturers model number
341B22802204
is the assigned MAC address of that device
These assigned aliases can be changed by using Digi IP Configurator so they can be more
easily identified.
