7.
Net >>
Network configuration settings
(„H“ type doorphone)
1. Add-L
Add new „L“ type doorphone to network (min LID=1, max LID=9999)
[donE] (pyyp) – entered correct LID
[Err] (pyp pyp) – wrong ID entered (0<LID<10000)
20
15
-
11
-
02
Edit-H
Edit „H“ type doorphone ID number.
[donE] (pyyp) – operation successful
3. rst.net
Reset Net settings (all Net settings are set to default values).
[donE] (pyyp) – default values was set. Default values are shown in Table 1.
Menu structure if L setting was already set in any net type
7.
Net >>
Network configuration settings
(„L“ type doorphone)
1. Edit-L
Edit „L“ type doorphone ID number.
[donE] (pyyp) – operation successful
2. rst.net
Reset Net settings (all Net settings are set to default values).
[donE] (pyyp) – default values was set. Default values are shown in Table 1.
8.
F.reset >>
Reset factory settings
1. Prog.
Reset settings to the factory values (see table).
After reset system will restart
2. All
Reset settings to the factory values (see table) and delete memory (all Tags).
After reset system will restart
Table 2: Programming settings/functions and factory values
Menu
Setting/function
Description
Factory value
1.Tag
1.3. AutoAdd
Auto add User Tags
2. off
2. Code
2.1. U.pin
User PIN codes
No codes assigned
2.2. S.pin
System PIN code
No SPIN assigned
3. Settings
3.1. Lc.delay
Lock delay time
5 sec.
3.2. Lc.type
Lock type
1. nc
3.3. Acc.type
Access control type
1. code – enabled
2. t.tag – enabled
3. r.tag – enabled
4. Vol.
4.1. User
User conversation volume
5 (1-9)
4.2. Guest
Guest conversation volume
5 (1-9)
4.3. Syst.
System signal volume
5 (1-9)
5. User
User administration
All ID enabled
6. Addressing
Addressing mode
Regular (1-255)
7. Net
Net configuration
off
4.3. DD-5100 programming manual
Programming mode consists of 8 main MENU items. For programming mode menu structure see fig. 12.
Menu items are placed in the order that the most frequently used settings could be reached the first. ( e.g. add /
21
