Digital Watchdog VMAX A1 DW-VAONE 1612TB User Manual Download

Page: 68 / 113

User’s Manual | 68

Select Event Log from the drop down list.

Select the search date and time from the drop-down calendar. Results will display automatically.

Start playback by double-clicking the Index number of each even list.

6.4.10 Audio & Bookmark Controls

Use the Audio control buttons to enable and disabled audio in live and playback modes.

(Audio On/Off): Turn On or Off the Audio channel.

Two-way Audio: Two-Audio between the CMS and DEVICE.

Bookmark: Add the selected channel to your bookmark list. See

6.5.7. Bookmark

for more information.

6.4.11 Display

The Pivot’s main display area will show all connected sites in live and playback modes. The software uses on screen
indicators to express viewing mode, selected channel, connection status, camera name and date and time.

Live mode OSD indicators:



LIVE will be displayed in white at the bottom right-hand corner of the channel.



Channel’s border will appear in blue.



Selected channel’s border will appear in yellow.



Channel’s name, date & time will appear in white on the top left-hand corner of the channel.



Device’s name will appear in white at the bottom left-hand corner of the channel.

Search/ Playback mode OSD indicators:



SEARCH will be displayed in red at the bottom right-hand corner of the channel.

Summary of Contents for VMAX A1 DW-VAONE 1612TB


















































































































Search results

Summary of Contents for VMAX A1 DW-VAONE 1612TB

Reviews:

Related manuals for VMAX A1 DW-VAONE 1612TB

Brands by name

Popular brands

Digital Watchdog VMAX A1 DW-VAONE 1612TB, User Manual

Search results

Summary of Contents for VMAX A1 DW-VAONE 1612TB

Reviews:

Related manuals for VMAX A1 DW-VAONE 1612TB

Brands by name

Popular brands