Digital Watchdog VMAX A1 DW-VAONE 1612TB User Manual Download

Page: 24 / 113

User’s Manual | 24

3.6

Quick Backup during Playback

User can easily archive video while viewing the video playback. See section

4.5 Backup

for more information on manual

backup from the setup menu.

In live mode, right-click anywhere on the screen and select ‘Backup’ to open the backup menu.

In playback mode, press the ‘Backup’ button on the popup menu bar to open the backup menu.

Adjust the following options:

a. Select the channels to be included in the backup file.

b. Adjust the start and end time of the backup file.

c. Select to include the Backup Viewer with the archived file.

d. Press the ‘Calculate’ button to see the expected size of the backup file.

e. Press the ‘Scan’ button next to the device to find the USB drive for backup.

f. Edit the file name and add a protection password if needed.

g. Press ‘Start’ to start the

backup process. A progress
bar will appear on the screen.

OTE

The “HELP” button offers interactive help, recommended settings and step-by-step

instructions on how to correctly setup main functions in the DVR.

Summary of Contents for VMAX A1 DW-VAONE 1612TB


















































































































Search results

Summary of Contents for VMAX A1 DW-VAONE 1612TB

Reviews:

Related manuals for VMAX A1 DW-VAONE 1612TB

Brands by name

Popular brands

Digital Watchdog VMAX A1 DW-VAONE 1612TB, User Manual

Search results

Summary of Contents for VMAX A1 DW-VAONE 1612TB

Reviews:

Related manuals for VMAX A1 DW-VAONE 1612TB

Brands by name

Popular brands