Z^
CAMERA SETUP > AE SETUP
OSD -
3
>
Press Near/Enter Key
1
2
1
2
2
Select ‘AREA>USER’,
Press Near/Enter Key
Joystick Down
>
>
DAY/NIGHT
- - - - - - - - - - - - - - - - - - - - - - - - - - -
-BURST
[
DAY NIGHT
]
-BRIGHTNESS
-DWELL TIME
[
NIGHT DAY
]
-BRIGHTNESS
-DWELL TIME
-MASK AREA
BACK
EXIT
OFF
MIDDLE
5
SEC
MIDDLE
5
SEC
1
2
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
DAY/NIGHT
MOTION
SHUTTER SPD
SENS-UP
BACK
EXIT
<
ALC
>
<
AUTO
>
F.FAST
- - -
AUTOx4
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
- WEIGHT
- WDR LEVEL
- WHITE BAL
BACK
EXIT
<
ALC
>
0
WDR
MIDDLE
0
INDOOR
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
BACK
EXIT
<
ALC
>
0
OFF
BURST
If BURST is set to ON, the burst signal is produced although the camera
is changed to B/W filter.
BRIGHTNESS
As the camera switches from Color to B/W with BRIGHTNESS set as LOW,
the images will appear darker. As the camera switches from B/W to
Color with BRIGHTNESS set as HIGH, the image will appear brighter.
DWELL TIME
When the switching criterions are satisfied, the filter is changed after
the status is maintained during the dwell time.
MASK AREA
If streetlights or traffic lights are present in a night scene, the mode
might not change to B/W. In this incident, setting MASK AREA to those
lights will correct the problem.
If BACKLIGHT is set to BLC, MASK AREA function is deactivated.
ON / OFF
LOW / MIDDLE / HIGH
2 SEC / 3 SEC / 5 SEC / 10 SEC / 15 SEC /
20 SEC / 25 SEC / 30 SEC
1 / 2
DAY/NIGHT
The camera automatically detects the change by the
brightness of the scene.
2
AE SETUP - IRIS > ALC > BACKLIGHT > WDR
In WDR mode, the brightness is adjusted in all area of the
picture by combining high speed shutter and low speed
shutter.
WEIGHT
If ‘WEIGHT is set to HIGH, the area applying high speed shutter is
expanded.
WDR LEVEL
As WDR LEVEL gets higher, the speed of the high speed shutter
gets faster.
WHITE BAL
If WHITE BAL is set to INDOOR, the color temperature adjusts based on
the darker areas. If WHITE BAL is set to OUTDOOR, the color
temperature adjusts based on the brighter areas.
LOW / MIDDLE / HIGH
-9 ~ +9
INDOOR / OUTDOOR
When WDR is used, the internally operating VPS function stops.
