Z]
CAMERA SETUP > AE SETUP
OSD -
3
AE SETUP
>
Press Near/Enter Key
1
2
1
Select BACKLIGHT > BLC.
Press Near/Enter Key
Select AREA > USER.
Press Near/Enter Key
Move Camera to BLC Area,
Press Near/Enter Key
IRIS
See below “ AE SETUP - IRIS > ALC.”
DAY/NIGHT
Color filter or B/W filter can be selected. If DAY/NIGHT is set to AUTO,
starts ‘DAY/NIGHT’ editing. See the next page “ DAY/NIGHT.”
This is changed to AGC or MOTION according to the SENS-UP
setting.
AGC
Enhances the brightness of the image by amplifying gain when the
illumination is low.
MOTION
If MOTION is set to S.SLOW, the shutter speed will be slower to obtain
more light. There will be less noise, but this can cause the ghost effect
of the moving object.
If MOTION is set to F.FAST, there will be less noise, but this will reduce
the ghost effect for any moving object.
SHUTTER SPD
If this speed is fater, the moving object can be photographed without
the ghost effect. However, the images can be dark if the scene lacks
sufficient lighting.
If SENS-UP is set to AUTO, SHUTTER SPD is deactivated.
SENS-UP
Activates the slow shutter function when luminance of the image is
too dark for the CCD to accumulate the amount of light it is set to
obtain.
2
2
2
IRIS LEVEL
BACKLIGHT
This function improves the backlight effect, which is when the subject
is dark on the monitor because the intensive backlight.
- BLC:
You can select the desired area you wish to brighten. If it is set on
a bright area, note that the area will appear even brighter.
- WDR:
See “AE SETUP - IRIS > ALC > BACKLIGHT > WDR” on the next
page.
AREA
If set to USER, the user can set the specific area.
See the screens on this page.
4 5
ALC / MANUAL
DAY / NIGHT / AUTO
VERY LOW / LOW / MIDDLE / HIGH /
VERY HIGH / USER 1~16 / FIX 1~16
S.SLOW / SLOW / NORMAL / FAST / F.FAST
OFF
/
1/100 ~ 1/10K
OFF / AUTO x2 ~ AUTO x256 / FIX x2 ~ FIX x256
-32 ~ +32
OFF / BLC / WDR
TOP / BOTTOM / LEFT / RIGHT / USER
AE SETUP - IRIS > ALC
If ALC is selected, the iris will be controlled automatically.
BLC AREA
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
DAY/NIGHT
MOTION
SHUTTER SPD
SENS-UP
BACK
EXIT
<
ALC
>
<
AUTO
>
F.FAST
- - -
AUTOx4
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
BACK
EXIT
<
ALC
>
0
OFF
<
ALC
>
0
BLC
CENTER
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
- AREA
BACK
EXIT
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[ENTER : SELECT]
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ADJUST MASK WIDTH]
[ ADJUST MASK HEIGTH]
[ENTER : SELECT]
>
>
>
3
3
4
5
