Safety Information
Z
Operating
t
Before using, make sure power supply and others are properly connected.
t
While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and
then contact your Special dealer.
Handling
t
Do not disassemble or tamper with parts inside the camera.
t
Do not drop or subject the camera to shock and vibration as this can damage the camera.
t
Care must be taken when you clean the clear dome cover. Scratch and dust will ruin the quality of the camera.
Installation and Storage
t
Do not install the camera in areas of extreme temperature, which exceed the allowable range.
t
Avoid installing in humid or dusty places.
t
Avoid installing in places where radiation is present.
t
Avoid installing in places where there are strong magnetic fields and electric signals.
t
Avoid installing in places where the camera would be subject to strong vibrations.
t
Never expose the camera to rain or water.
PRECAUTION
