Digital Watchdog MEGApix DWC-MF2Wi28TW User Manual Download Page 14

Page: 14 / 87

Installation -

Managing the SD Card

Micro

The memory card is an external data storage
device that has been developed to offer an
entirely new way to record and share video,
audio, and text data using digital devices.

Recommended SD card specification

(not included)

- Type: Micro SD (SD/SDHC/SDXC)
- Manufacturer: SanDisk, Samsung,

Transcend, Micron

- Capacity: 4GB~128GB
- Class: UHS-I U3 Class 10

New micro SD card over 64GB must be
formatted on the first use.

Inserting an SD Memory Card

Insert the SD card in the arrow direction.

Don’t insert the SD memory card while it’s

upside down by force. Otherwise, it may
damage the SD memory card.

Removing an SD Memory Card

Gently press down on the exposed end of the
memory card as shown in the diagram to eject
the memory card from the slot.

Pressing too hard on the SD memory card can

cause the card to shoot out uncontrollably from
the slot when released.

If you have saved data in the SD memory card,

removing the SD memory card before setting
the record to OFF will cause damage to the data
stored in the card.

Summary of Contents for MEGApix DWC-MF2Wi28TW
























































































Search results

Summary of Contents for MEGApix DWC-MF2Wi28TW

Reviews:

Related manuals for MEGApix DWC-MF2Wi28TW

Brands by name

Popular brands

Digital Watchdog MEGApix DWC-MF2Wi28TW, User Manual

Search results

Summary of Contents for MEGApix DWC-MF2Wi28TW

Reviews:

Related manuals for MEGApix DWC-MF2Wi28TW

Brands by name

Popular brands