Digital Watchdog KB-100, User Manual

Page: 12 / 22

START
In order to control the DVR, first setup the SITE ID, baud rate as “9600”, and the Keyboard as “KB-100” on
the DVR.
1. Select the DVR mode by pressing Mouse button.
2. Enter the DVR ID using the number keypad on the keyboard and press and hold the ENTER button.
3. Press MENU to display the DVR menu setup and RETURN to exit the menu setup.
4. Press FRZ/MODE to change the camera display.
5. Press and hold the ENTER and SHIFT buttons at the same time for 10 seconds to select
another
DVR.
DVR CONTROL
Precautions Before Start
- Before installing the keyboard, be sure to turn the power off.
- A strong shock or vibration may cause malfunction of the product.
- Avoid installing in locations near strong magnetic and radio waves, such as radio, TV, or wireless devices.
- During or after installation, make sure the area around the device is tidy.
- During instllation, make sure the product is flat on the floor, maintain proper temperature, and keep the
product at least 15cm (5.9in) away from the wall.
Operating Temperature: 0
o
C ~ 45
o
C (32
o
F ~ 113
o
F).
Storage Temperature: -10
o
C ~ 60
o
C (14
o
F ~ 140
o
F).
Input Voltage: DC12V, 140mA
DC9V (Alkaline Batteries) - Purchase Separately
Power Consumption: 20mA (LCD OFF)