WEBVIEWER*
S e t u p > C a m e r a > I m a g e S e t t i n g
A d j u s t t h e M E G A p i x ® C a a S ™ c a m e r a ’ s D a y & N i g h t , I m a g e a n d C o l o r
s e t t i n g s .
1. BASIC SETTINGS
a.
3D Digital Noise Reduction – Control the level of noise in the image. Select from Off, Low, Medium and High. The
higher the level, the more the camera will manipulate the image to reduce digital noise, but it will also increase lagging
when motion occurs. By default, the 3D DNR settings are set to Low.
b.
Digital WDR (Wide Dynamic Range) – The Digital Wide Dynamic Range is used when there are extremely bright and
extremely dark areas in the VoF of the camera. Select to enable or disable this feature. By default, Digital WDR is set
to ON.
c.
BLC (Backlight Compensation) – This setup option allows you to adjust the camera’s capture of light when there is
strong backlight in the camera’s Field of View [FoV]. By default, BLC is set to OFF.
d.
Exposure Control – In case the camera’s image is flickering, adjust the value on this setting. By Default, Exposure
Control is set to 60GHz.
2. EXPOSURE SETTING
a.
Slowest Level – Set the shutter speed from the
available options between 1/7.5 and 1/8000.
Select 1/7.5 to set more exposure time to light. This
setting is used to make movements look natural/
unfrozen. Select 1/8000 to set less exposure time to
light. This settings is used to catch fast moving objects.
b.
Sensor Max Gain – Maximum light gain settings in low
light conditions. Select from 26dB (least light), 30dB,
36dB to 42dB (most light). Default value is 36dB
c.
Fastest Exposure – Set the shutter speed from the
available options between 1/25 and 1/32000.
Select 1/25 to set more exposure time to light. This
setting is used to make movements look natural/
unfrozen. Select 1/32000 to set less exposure time to
light. This settings is used to catch fast moving objects.
d.
Metering Mode – This is the region of interest for the
exposure settings. The camera’s exposure will be
determined by the selected Metering Mode, affecting
the camera’s bright levels. Select an option from the
available drop-down options.
e.
Custom Metering Area – If ‘Custom’ is selected in the
Metering Mode, adjust the Metering Mode position in
the camera’s FoV. Select an option from the available
drop-down options.
3 0
