Digital Watchdog DWC-PTZ39XFM, User Manual, Page: 39 / 46

Z`
SYSTEM SETUP
OSD -
3
SYSTEM SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
< DATE/TIME SETUP >
< RELAY TYPE >
< PASSWORD >
< SET HOME POSITION >
< SET NORTH DIRECTION >
LANGUAGE
AUTO CAL. OFF
BACK
EXIT
>
ENGLISH
DATE/TIME SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DATE
TIME
BACK
EXIT
0 1 /JAN/2008(TUE)
00:00:0 1 (H/M/S)
RELAY TYPE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
RELAY 1
RELAY2
RELAY
3
RELAY4
BACK
EXIT
NORMAL OPEN
NORMAL OPEN
NORMAL OPEN
NORMAL CLOSE
EDIT PASSWORD
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
OK
CANCEL
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
a b c d
e f g h i j k l m n
o p q r s t u v w x
y z < > - /
: .
DISABLE
Press
Near/Enter
Key
3
1
2
4
3
1
2
SYSTEM SETUP
<DATE/TIME SETUP>
Opens DATE/TIME SETUP menu.
<RELAY TYPE>
Opens RELAY TYPE menu.
<PASSWORD>
Opens PASSWORD menu.
<SET HOME POSITION>
Opens SET HOME POSITION menu.
<SET NORTH DIRECTION>
Opens SET NORTH DIRECTION menu.
LANGUAGE
You can select a preferred language for the OSD display.
After selecting a language, press Near or Enter key.
AUTO CAL.
If the camera is continuously subjected to very high temperatures
(over 50°C or 122°F) for a long period of time, it is possible for the
camera to lose focus and produce blurry images. When this happens, it
is recommended to turn ON the auto calibration feature.
If AUTO CAL is set to ON, it will be conducted for 10 seconds every
24 hours.
- During auto calibration, unexpected images can appear due to
unordinary PTZ movement.
- During auto calibration, the figures “A.C” will be displayed on the
bottom left cornor of the screen.
- During auto calibration, some functions including PTZ cannot be
executed.
ENGLISH / ESPAÑOL / FRANÇAIS / DEUTSCH
/ ITALIANO / РУССКИЙ / PORTUGUÊS
ON / OFF
RELAY TYPE SETUP
EDIT PASSWORD
Set a password that consist of 4 characters. If this function is set
to ENABLE, the password is required whenever you open the
OSD menu.
The default password is “4321,” and the master password is “- - > g.”
RELAY1, 2, 3, 4
Define the type of relay output for each of the four relays.
NORMAL OPEN (N.O) / NORMAL CLOSE (N.C)