Y`
FUNCTION SETUP > PATTERN SETUP
OSD -
3
3
3
1
2
4
5
4
2
PATTERN SETUP
Pattern function is when a camera memorizes the path (mostly
curve path) created by a joystick controller and revives the path
exactly as it memorized for an assigned time.
4 patterns are available and maximum 1000 communication
commands can be stored in a pattern.
PATTERN NO.
Select pattern number to edit. If a selected pattern number is not defined,
UNDEFINED will be displayed under selected pattern number.
CLR PATTERN
Deletes data in the current pattern.
<EDIT PATTERN>
Starts editing pattern.
1 ~ 4
CANCEL / OK
EDIT PATTERN - Select the Position
1. By using joystick, move to the start position with appropriate
zoom.
2. To start the pattern recording, press Near or Enter key.
3. To exit this menu, press Far key.
EDIT PATTERN - Records
1. Move the camera with joystick of the controller or run preset
function to memorize the path (mostly curve path) in a
selected pattern.
2. The total memory size and the rest memory size is displayed
in the form of a bar.
3. To save data and exit, press Near key.
4. To cancel recording and delete the recorded data, press Far
key.
>
>
>
>
Select <EDIT PATTERN>,
Press Near/Enter Key
Press Near/Enter Key
Move Camera to Area,
Press Near/Enter Key
Record the Path of the Pattern
by Camera Control
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
0/0/x1/E
EDIT PATTERN 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO START POSITION
[NEAR:START/ FAR:CANCEL]
0/0/x1/E
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
0/0/x1/E
PATTERN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PATTERN NO.
CLEAR PATTERN
<
EDIT PATTERN
>
BACK
EXIT
1
UNDEFINED
CANCEL
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<
PRESET SETUP
>
<
SCAN SETUP
>
<
PATTERN SETUP
>
<
GROUP SETUP
>
<
SCHEDULE SETUP
>
BACK
EXIT