manualshive.com logo in svg

Digital Watchdog DW-VAC162T, User Manual

Share
Download
Digital Watchdog DW-VAC162T User Manual Download Page 51

47 

 

 

WEB PORT 

Input the port number to use when connecting from the Web Browser. Default is 80. If your ISP blocks the 
port #80, you need to input another valid web port number (ex. 8080).   
 

BANDWIDTH LIMIT 

Depending on the setting made by the  user, the system can control the data volume transmitted over a 
network ranging from 25 kbps up to 1Gbps. This function is effective especially under narrow bandwidth 
network conditions or when a user wants to limit “network bandwidth occupied by video transmission” to a 
certain level. Default is 100 Mbps.   
 

UPnP (Universal Plug and Play) 

UPnP is a plug-and-play feature that allows the DVR to be automatically discovered by a PC on the same 
network. To locate the DVR, go to “My Network” on your PC. The computer will scan your network for all 
supported devices. The first five chartacters of the file name of a detected DVR represent the model 
number, followed by the DVR’s IP address. UPnP supports “auto port forward function (NAT TRAVERSAL)” 
even if the user does not set port forward in the router. It may not be supported in some routers and some 
network conditions. 
 
Input necessary information based on your network environment.   
 

 NETWORK TYPE   :  Select STATIC IP (in case of fixed IP) 

 IP ADDRESS      :  Assign a local IP # to DVR (ex, 192.168.0.164) 

 SUBNET MASK 

:  Input subnet mask of your LAN (ex, 255.255.255.0) 

 GATEWAY 

:  Input gateway of your LAN (ex, 192.168.0.1) 

 DNS SERVER     : Input IP # of your DNS server   

  You must input this IP # for internet connection. Please contact your ISP to 
  get this IP#. You can input “8.8.8.8” in case you do not know this IP#.   

 TCP/IP PORT 

:  Default is 9010.   
  If your ISP blocks the port # 9010, you need to input another valid  port   
  number. (ex, 9020) 

 WEB PORT     

: Default is 80   
  If your ISP blocks the port # 80, you need to input another valid web port   
  number. (ex, 8080) 

 BANDWIDTH LIMIT : Default is 100 Mbps. 

    Select bandwidth limit you want to set in consideration of network condition. 

 

Note 

The maximum number of simultaneous connection is 15 users.   

 

 

 

Summary of Contents for DW-VAC162T

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands