Specifications subject to change without notice
© Digital View Ltd
– Ver 2.0 August 19, 2016 (SVX-4096_manual.doc)
Page 39 of 54
Appendix II
– Network connection
The SVX-4096 LCD interface controller has an RJ-45 Ethernet port for control and monitoring over a
network. This application note introduces the two user interface modes:
Command line direct mode
Browser based web server mode
There is also a short overview of the command set and how it is implemented.
QUICK GUIDE
For experienced users the following quick guide to trying out the network connection and functions
may be useful.
Command line direct mode
: This is relevant when a PC application is used to send and receive
commands over the network port.
Browser based web server mode :
The network port will require an alternative firmware version if
the browser based web server mode is required.
Works with a normal network with DHCP, i.e. must use a router.
Connect the SVX-4096 to the network and ensure power is on.
Use the IP Locator utility available from the IP-60 web-page.
http://www.digitalview.com/media/downloads/IPLocator.zip
(Windows only)
Double click on the IP address in the IP Locator window, it will open the SVX-4096 browser
page in your default browser. Alternatively copy the IP address into your browser address
line.
Test the functions that come up on the browser.
For details, please refer to the separate application note.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
