Page 21 of 36
6
LCD Display Setup
6.1 Use of OSD switch mount
By way of explanation the following refers to a set of sample buttons that
may be obtained as an option. In addition to power on/off and connection
for backlight brightness the controller provides an On Screen Display of
certain functions which are controlled by 5 momentary type buttons
(analog VR type) or 8 momentary type buttons (digital type):
Controls
Analog VR type
Digital type
On/Off – turns controller board power on
VR toggle switch
On/Off button
Brightness – controls backlight brightness
Rotary VR
Brig/- buttons
Menu – turns OSD menu On or Off (it will
auto time off)
(Function with signal input only)
Menu button
Menu button
Select – Select function / Confirm
(Works under OSD menu on state)
SEL DN
SEL DN
Move up to select individual RGB color
level OSD page
(Works under OSD menu on state)
SEL UP
SEL UP
+ – increase the setting / moves the
selector to the next function
(Works under OSD menu on state)
+
+
- - decrease the setting / moves the
selector to the previous function
(Works under OSD menu on state)
-
-
Load factory default
Press and hold SEL
DN botton to power
on the controller
Press and hold SEL DN
botton to power on the
controller
Lock OSD menu
(Function with signal input only)
Press and hold MENU
button for 15 seconds
to enable / disable
lock of the OSD menu
Press and hold MENU
button for 15 seconds
to enable / disable lock
of the OSD menu
Switch to next input source
(Works under OSD menu off state)
+
+
O N /O ff/B rig h tn e ss
S E L U P
S E L D N
+
-
M e n u
An a lo g VR typ e
Dig ita l typ e
