Page 8 of 36
CAUTION:
Before connecting power ensure all parts are suitably
insulated and there is no risk of short circuit or electrocution. Connect
the power supply (DC 12V @ 1.2A minimum. - ensure correct polarity)
to the M3-310 power input (PP1).
Plug the OSD switch mount cable (p/n:420680260-3) to CNC1 on the
M3-310 and another to the OSD switch mount. (P/N:416100520-3)
For “Auto play with Power On” , short the pin1-2 on JP6
Ensure there is a CF card installed with compatible media loaded.
If the optional buttons are being used connect them to CN6 and CN3
