Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.01 : 15 Dec, 2017 (hsp-1920-manual-v101.doc)
Page
7 of 47
LCD DISPLAY SYSTEM SETTINGS
NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an option. In
addition to power on/off and connection for backlight brightness the controller provides an On Screen Display of certain
functions which are controlled by 5 momentary type buttons (analog VR type) or 8 momentary type buttons (digital type):
Controls
Analog VR type
Digital type
On/Off – turns controller board power on
VR toggle switch
On/Off button
Brightness – controls backlight brightness
Rotary VR
Brig/- buttons
Menu
–
Turns OSD menu On or Off (it will auto time
off)
–
Back to top of OSD sub-menu page
Menu button
Menu button
Select down
–
Moves the selector to the next function (down)
SEL DN
SEL DN
Select up
–
Moves the selector to the previous function
(up)
SEL UP
SEL UP
+
–
Increase the OSD parameter values
–
Go into the sub-menu page
–
Confirm to select the OSD function
+
+
-
–
Decrease the OSD parameter values
-
-
Reset to Factory Defaults
Press and hold SEL DN
button, then power on the
controller
Press and hold SEL DN
button, then power on the
controller
Soft power off and on
(1)
Hold Menu button for 3-4
seconds
Press Menu button to turn
back on.
Hold Menu button for 3-4
seconds
Press Menu button to turn
back on.
(1)
Effective on V1.05.00.00 firmware or up revision.
ON/Off/Brightness
SEL UP
SEL DN
+
-
Menu
Analog VR type
Digital type
12V / 24VDC power input :
Analog 10K VR Type OSD
switch mount uses
P/N 410680550-3 or up
12V / 24VDC power input :
Digital 10K Type OSD switch
mount uses
P/N 416100520-3 or up
