7
TOUCH SCREEN SETUP &
INSTALLATION SETUP PROGRAME
If you have a DV-3000 model with touch screen fitted you will need to connect the
touch screen to a COM port on the computer and install driver software.
Connection of Touch screen
•
Turn off your computer. The computer should always be turned off before
connecting or disconnecting a device.
•
Connect the touch screen monitor to the computer using a standard serial
cable: 9-pin male (for DV-3000 monitor connection) to 9-pin or 25-pin female
serial cable (for computer connection).
Installation setup program from Operating System
Install the touch screen software from Windows 3.1x / Windows 95 / DOS
1. Make sure the touch screen is connected. If not, the Setup program cannot
properly configure the touch screen.
2. Start up the computer in the operating system you are planning to work in
DOS or Windows.
3. Make sure no other applications are running.
4. Insert the Touch screen installation diskette into 3.5” disk drive.
5. Click the Start button, and then click Run (assumed under Windows 95
environment)
6. In the Open box, type the location and name of the program you want to start
as follows:
7. Select OK.
8. Setup program will auto-start and follow the instructions displayed on the screen.
Make your selections carefully when answering questions to complete the
installation.
