6
SWITCHES & FUNCTIONS
All controls are mounted on the back of the monitor housing.
Monitor Back
MENU
+
-
SELECT
Brightness
ON/OFF
AUX input
Power input
VGA input
Controls on the back:
•
Menu
- Brings up the On Screen Display menu (OSD)
•
+
- Adjust the menu option in the ‘+’ direction
•
-
- Adjust the menu option in the ‘-‘ direction
•
Select
- To choose the menu option
•
Brightness
- Control monitor brightness
•
On / Off power
- Switch On or Off of the monitor
Connectors:
•
VGA Input
: It is recommended that the cable fixing screws are tightened to
hold the connector firmly in VGA input port at the monitor back. Do not use
an alternative cable as incorrect pin assignments may cause damage and
invalidate warranty.
•
Power Input
: 12V DC input from power supply as provided with the monitor.
•
AUX Input – for touch screen models
: Standard serial port connector - 9
pin ‘D’ shell female. This is used to connect the touch screen from the
monitor to the computer COM Port. Installation program and driver for touch
screen are provided and must be setup in the computer before use.
