Digital View 41776001X-3, Instructions Manual

Page: 28 / 42

Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00 : 13 Jan, 2021 (SP-1920-DUAL-HDMI_manual.doc) Page
28 of 42
Green level for
selected colour
temperature 0xb5,
nn | “+” | “-” |
“r” | “R” |
“?” Set the level of the green
channel for the selected colour
temp. =
value/increment/decrement
Reset
Query Green level for selected colour
temperature.
Range: “0””0”-“F””F”
Default: “8””0”
Blue level for
selected colour
temperature 0xb6,
nn | “+” | “-” |
“r” | “R” |
“?” Set the level of the blue channel
for the selected colour temp. =
value/increment/decrement
Reset
Query Blue level for selected colour
temperature.
Range: “0””0”-“F””F”
Default: “8””0”
Graphic horizontal
resolution enquiry 0xb7 Horizontal resolution (in pixels) in
3 digit hex number “nnn” = horizontal resolution
Graphic vertical
resolution enquiry 0xb8 Vertical resolution (in lines) in 3
digit hex number “nnn” = vertical resolution
Graphic horizontal
sync frequency 0xb9 Horizontal sync frequency (in
units of 100Hz) in 3 digit hex
number “nnn” = horizontal frequency
Graphic vertical
sync frequency 0xba Vertical sync frequency (in units
of Hz) in 3 digit hex number and
1 char “nnnc” = vertical frequency
nnn = 3 digit hex
c= “i” or “p”
interlace or Progressive
OSD turn off 0xbd Turn off the OSD. “0” – fail.
“1” – successful.
Backlight control (8bit mode)
0xe0,
nn | “+” | “-” |
"="|
“R” | “r” |
“?”
(12bit mode)
0xe0, 0x4c
nnn | “?”
Set Backlight =
value/increment/decrement
Display OSD indicator
Reset
Query Backlight.
Range:
D/A : “0””0” ~ “6””4”
100Hz : “0””0” ~ “6””4”
120Hz : “0””0” ~ “6”"4”
140Hz : “0””0” ~ “6””4”
160Hz : “0””0” ~ “6””4”
180Hz : “0””0” ~ “6””4”
200Hz : “0””0” ~ “6””4”
220Hz : “0””0” ~ “6””4”
240Hz : “0””0” ~ “6””4”
260Hz : “0””0” ~ “6””4”
280Hz : “0””0” ~ “6””4”
300Hz : “0””0” ~ “6””4”
320Hz : “0””0” ~ “6””4”
340Hz : “0””0” ~ “6””4”
360Hz : “0””0” ~ “6””4”
380Hz : “0””0” ~ “6””4”
400Hz : “0””0” ~ “6””4”
420Hz : “0””0” ~ “6””4”
440Hz : “0””0” ~ “6””4”
Range:
“0”“0”“0” (0) ~
“F”“F”“F” (4095)
“E”“E”“E” = Backlight OFF
feedback:
“N”“I”“L” = No 12bit support
Backlight D/A /
PWM 0xe5
“0” | “1” |
“R” | “r”
”?” Set : PWM or D/A
Reset
Query
“0” – PWM
“1” – D/A (Default)
OSD turn off 0xbd Turn off the OSD. “0” – fail.
“1” – successful.