Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00 : 13 Jan, 2021 (SP-1920-DUAL-HDMI_manual.doc)
Page
19 of 42
CONTROLLER DIMENSIONS
Ready-made 3D Pro-E (SLDPRT) drawing files -
Save time and effort for your system volumetric analysis design.
Includes jpg file previews. Please go to download at
https://www.digitalview.com/controllers/sp-1920-dual-hdmi-lcd-
controller.html
The maximum thickness of the controller is 9.1 mm with or without video add-on board (measured from bottom of
PCB to top of components, including any underside components & leads). We recommend clearances of:
•
5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of suitable insulation
material is added to the mounting plate surface.
•
10mm above the components
•
3~5mm around the edges
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high
voltage parts such as the inverter.
