E – 41
External Control
RS232C
(1) D-sub 9 pin
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement
200-240 VAC, 50/60Hz
Input Current
14 A
Power Consumption
2.8 kW
BTU
9554 per hour
Air flow
250 M
3
/ hr
Air Inlet
Underside front centre
Air Outlet
Rear of left side (viewed from rear)
Mechanical
Installation
Orientation:
Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Stacking:
Up to 2 projectors can be gravity stacked
Dimensions
26.8" (W) x 38.3" (D) x 14.2" (H) with foot (not including lens hood and handle)
680 mm (W) x 973 mm (D) x 360 mm (H) with foot (not including lens hood and handle)
Net Weight
185.3 lb (84Kg) (without lens)
Environment
Operational Temperature
40˚ to 95˚F / 5˚ to 35˚C,
Humidity: 20-80% non-condensing
Storage: 14˚ to 122˚F / -10˚ to 50˚C
Humidity: 20-80% non-condensing
Fan Noise
48dB
Regulations
USA
UL 1950
FCC Class A
Canada
CSA950 ( C-UL )
Europe
EN60950
EN55022 Class A
EN55024
EN61000-3-2
EN61000-3-3
Japan
J60950
VCCI
Oceania
EN60950
AS/NZS3548
Class A
Asia
EN60950
CISPR22
Class A
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 1 pixel or less around the perimeter (when projection
upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
