7-2
7. Setting Up for Double Stacking in Link Mode
z
Stacking and Connecting the Projectors
Master projector
Slave projector
NOTE: Up to two units can be gravity stacked without external support. In some
cases, however, two images will not align on the screen correctly. This will become
more apparent when displaying small text and detailed graphics.
NOTE: Do not stack both the SHOWlite 6000gv and 5000sx
+
projectors together.
CAUTION: To prevent the projectors from falling, install them in a place and fasten them in a
way with sufficient strength to support the two projectors. The projector with a lens weighs 21
kg/46.3 lbs.
z
-1. Assigning Projector IDs
You can operate multiple projectors with the same remote con-
trol.
To do so:
z
-1-1. Select [Projector Options]
→
[Link Mode]
→
[Settings]
→
[Projector ID] a-nd assign an ID number to each projector. See
also page 8-18.
z
-1-2. Select the same communication speed for both the pro-
jector.
NOTE: Do not turn on [Master] or [Slave] at this time.
z
-1-3. On the remote control specify the ID number of the pro-
jector to be adjusted. Press and hold the CTL and press
MENU (ADDRESS) button to enter the ID number.
You can operate the projector assigned the same ID number
as the remote control.
NOTE: Specifying "None" for projector ID allows you to operate multiple projectors
concurrently. However, some projectors may not synchronize to the other projec-
tors.
