Digital Projection
M-Vision Cine 400 3D series
OPERATING THE PROJECTOR
Installation and Quick-Start Guide
Revision C, July 2014
Adjusting the lens
Zoom
Turn the smooth ring on the lens, closest to the case, to adjust the zoom so that the image fills the screen.
Focus
Turn the knurled ring at the outer end of the lens, to adjust the focus until the image is sharp.
Shift
1. To reveal the adjustment access holes, slide the Digital Projection badge in the direction shown below, then gently lift it off by hand.
2. Use the 5mm Allen wrench to adjust the horizontal and vertical position of the image.
Notes
Do NOT prise off the badge
using a tool.
Lens shift controls are not available
on projectors fitted with the fixed
0.73:1 lens.
Inst-08
Horizontal shift
Vertical shift
