Digital Projection
M-Vision Cine 400 3D series
POSITIONING THE SCREEN AND PROJECTOR
Installation and Quick-Start Guide
Revision C, July 2014
Positioning the screen and projector
Consider the following:
●
When installing the screen, ensure that it is in the best position for viewing by your audience.
●
When positioning the projector, ensure that it is at a suitable distance from the screen for the image to fill the screen.
●
Whether you are mounting the projector on the ceiling or standing it on its adjustable feet, ensure that it is level and perpendicular to
the screen.
The dimension drawing below shows the positions of the feet for table mounting, and the fixing holes for ceiling mounting.
Notes
All dimensions on the diagram on
this page are in mm.
Ensure that there is at least
30cm (12in) of space between
the ventilation outlets and
any wall, and 10cm (4in) on all
other sides.
Do not stack more than 3
projectors.
Do not tilt the projector more
than ±12° from side to side
when in use, as this may cause
serious lamp failure, damage
the lamp module and cause
extra cost on replacement.
The projector may be tilted
to one side and positioned in
portrait mode as long as the
exhaust outlet points upward.
When positioning the projector
in portrait mode, ensure
adequate airflow to the air
inlet.
Inst-06
±12°
±12°
