Digital Projection
M-Vision Cine 320 Series
USING THE MENUS
Operating Guide
28
Rev D July 2014
Editing projector settings
Most settings are changed by selecting from a list.
•
Select from the list using the
LEFT
and
RIGHT
arrow
buttons.
The change will be made immediately.
Some submenus mark the current selection with a
cross
(Fig. 1)
. To change the selection:
1. Use
UP
and
DOWN
to highlight the item you wish to
select.
2. Press
ENTER/SELECT
to clear the current selection
and select the highlighted item.
Sliders
1. Activate a slider
(Fig. 2)
by pressing
LEFT
or
RIGHT
.
2. Adjust the value using the
LEFT
and
RIGHT
arrow
buttons.
3. Accept the change and close the slider by pressing
MENU
or
ENTER/SELECT
.
Commands
To execute a command,
•
Highlight the command and then press
ENTER/
SELECT
.
Sometimes you will be asked for confirmation
(Fig. 3)
.
Select
Yes
or
No
using the
LEFT
and
RIGHT
arrow
buttons, then press
ENTER/SELECT
to confirm your
choice.
Fig. 1 Selection marked with a cross
Fig. 2 Slider
Fig. 3 Confirmation dialog
Notes
