page 4.20 105-681B January 2007
4. Using the menus
Digital Projection
LIGHTNING 30sx+m, 40sx+m
User Manual
Notes
Do not make changes to the
networking configuration
unless you understand what
you are doing, or have taken
advice from your Network
Manager.
If you make a mistake, it is
possible that you will lose
contact with the projector.
Always double-check your
settings before pressing the
APPLY button.
Always keep a written note of
the original settings, and any
changes you have made.
When entering the channel
number, a leading zeroes must
be used for single digit
numbers:
eg 02
If the WEP security key is to be
used, then the projector must
be set to the same method and
number of bits as the computer
or wireless access point.
Config menu...
Network configuration...
Wireless LAN...
Encryption
Settings...
SSID
Channel
WEP key
Mode
Menu buttons...
Configure ethernet #1
Configure wirelss LAN
Encryption
•
Press the
ENCRYPTION
button.
•
To change the SSID, press the
SSID
field.
Use keypad to enter the (up to) 12 digits SSID. This will appear in the field at the
top of the keypad.
Press
ENTER
to transfer the SSID from the keypad display to the SSID field.
•
To change the channel number, press the
CHANNEL
field.
Use keypad to enter the channel number (01 - 16, including a leading zero for
single figure numbers). This will appear in the field at the top of the keypad.
Press
ENTER
to transfer the number from the keypad display to the Channel
field.
•
To change the WEP Key, press
WEP Key
a number of times to cycle through the
options. Choose from:
Disabled
64 bits
(0x1234567890) (10
hex
digits)
128 bits
(0x12345678901234567890123456) (26
hex
digits)
Pass Phrase
(abcdefghijklmnopqrstuvwx) (24 characters)
Press the
WEP Key
field.
Use keypad to enter the key. This will appear in the field at the top of the keypad.
Press
ENTER
to transfer the key from the keypad display to the WEP Key field.
•
To change the mode, press the
MODE
button to choose from:
Infrastructure Access Point
(usual mode for an established corporate network)
Adhoc peer to peer
(usual mode for a single computer and projector)