page 83
Digital Projection INSIGHT 4K Laser Series
Reference Guide
APPENDIX G: EARLIER VERSIONS
Rev C June 2016
3. Insert the lens into the mount.
Engage the three
locating studs
1
into the corresponding
slots
2
on the mount.
4. Rotate the lens clockwise until the studs slide all the way into the
slots.
5. Tighten the two
fixing screws
3
on the lens holder.
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
1
2
3
3
