page 19
Digital Projection INSIGHT 4K Laser Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev C June 2016
Selecting a test pattern
Switch on the projector and, if necessary,
unlock the keypad.
If the test pattern is assigned a shortcut, press
the shortcut button and the projector will begin
displaying the test pattern.
If there is no shortcut assigned to the test
pattern:
1. Press the
MENU
button.
2. Press the
LEFT
or
RIGHT
button to
cycle through the list of menus until
Title
Select
appears on the LCD screen. The
list of menus is as follows:
•
Title Select
•
Configuration
•
(Title Setup)
•
Information
•
...
3. When
Title Select
is displayed, press
DOWN
.
4. Press
LEFT
or
RIGHT
until
Title Select
is set to
TEST Pattern
.
5. Press
DOWN
again, then press
LEFT
or
RIGHT
to cycle through the list of test
patterns.
6. When you have arrived at the test pattern
you wish to display, press
ENTER
to
confirm your choice. The projector begins
displaying the test pattern. An asterisk
mark (*) appears on the LCD screen to
indicate the current selection.
To cancel test pattern display, cycle through
the list again and select OFF, then press
ENTER
to confirm your choice.
Title Select
Off
Title Select
(*)
TEST Pattern
Alignment
Title Select
(*)
TEST Pattern
Notes
For detailed information about
switching on the projector and
unlocking the keypad, see
in this guide.
