page 80
Digital Projection INSIGHT 4K Laser Series
Reference Guide
APPENDIX G: EARLIER VERSIONS
Rev C June 2016
Lens assembly and fitting
Assembling the lens
Assembling the lens is the process of fitting the lens holder and motor cover to the lens. If your lens already has these parts fitted, skip this
procedure.
To assemble the lens:
1. Detach the
retaining plates
1
from the lens holder.
Use a 2.5 mm Allen key to remove the
M3 socket head screws
2
.
2. Insert the lens into the lens holder. Align
the notches on the lens
3
with
the notch on the holder
4
.
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
1
2
2
1
2
2
3
3
4
