Digital Projection HIGHLite1400HD, User Manual

Page: 63 / 96

E-63
NOTE: Specifying "None" for Projector ID allows you to operate multiple projectors
concurrently. However, some projectors may not synchronize to the other projec-
tors.
Selecting Default Source [Default Source Select]
You can set the Projector to default to any one of its inputs
each time the Projector is turned on.
Last ............. Sets the Projector to default to the previous or
last active input each time the Projector is turned
on.
Auto ............. Searches for an active source in order of Slot 1
→
Slot 2
→
Slot 3
→
Slot 4
→
Slot 1 and dis-
plays the first found source.
Select .......... Displays the selected source input every time the
Projector is started up. Select an input from the
pull-down menu.
Disabling the Cabinet Buttons [Control Panel Key Lock]
This option turns on or off the Control Panel Key Lock func-
tion.
NOTE:
• This Control Panel Key Lock does not affect the remote control functions.
• When the cabinet buttons are disabled, pressing and holding the CANCEL button
for about 10 seconds will change the setting to enable.
LAN Mode
This feature allows you to set various setting items when the
Projector is used on your network.
Consult with your network administrator about these settings.
NOTE:
• Connect an Ethernet LAN cable to the LAN port (RJ-45) of the Projector for net-
work connection.
Optional wireless LAN card is available.
• The standard built-in LAN feature and a commercially LAN card are available for
network connection, but only one can be used at a time (mutual exclusion).
CAUTION: Make sure that the LAN card is removed with the
main power off. Failure to do so may cause damage to the LAN
card, or may cause the Projector to malfunction. Should a mal-
function occur, turn off the main power and turn it back on.
Status
LAN Card
This option selects to use either LAN feature between the stan-
dard LAN port (RJ-45) and an optional LAN card inserted in
the PC CARD slot.
Projector Name
Specify a unique Projector name. Press
H
to display the soft-
ware keyboard and type in. Up to 16 alphanumeric characters
can be used.
IP Address ............... Indicates the IP address of the Projec-
tor.
Subnet Mask ........... Indicates the subnet mask of the Pro-
jector.
Gateway .................. Indicates the gateway of network con-
nected to the Projector.
MAC Address .......... Indicates the MAC address of the LAN
card.
Advanced ................ Displays the IP Address setting window.
Reconnect ............... Use this button to connect the Projector
to a network.
NOTE: Once you have selected "OK" on the Advanced screen, you cannot cancel the
changes using "Cancel" on the LAN Mode screen.
6. Using On-Screen Menu