Using the projector
Digital Projection Ltd. E-Vision Laser 13000 WU Series
Power on / off
Power on/off
Auto Power Off
Off
Auto Power On
Off
Scheduled on-off
►
l
Auto Power Off
Set this to On if you want the projector to go into STANDBY mode when no input source is detected for
20 minutes.
l
Auto Power On
Set this to
On
if you want the projector to start up immediately when the mains is connected. Set this to
Off
if you want the projector to go into STANDBY mode when the mains is connected. In this case, the
projector will not start up until the
POWER
button is pressed on the control panel or the
ON
button is
pressed on the remote control.
Scheduled on-off
Schedule
Off
S
M
T
W T
F
S
Time
On
12:34
Off
12:34
On
12:34
Off
12:34
l
Scheduled on/off
Access this submenu to create a weekly schedule for automatic on and off times:
1. Set a schedule:
l
Use the
UP
and
DOWN
arrow buttons to highlight a row, then press
ENTER/OK
to enable
edit mode.
l
Within a row, navigate with the
LEFT
and
RIGHT
arrow buttons. Set values with the
UP
and
DOWN
arrow buttons.
l
To exit edit mode, press
ENTER/OK
. Alternatively, press
EXIT
if you don’t want the
changes to take effect. Move to another row using the
UP
and
DOWN
arrow buttons.
2. To enable the schedule, set Schedule to
On
.
Operating Guide
Rev A June 2019
page 79
Notes
