Digital Monitoring Products XR40 Security Command Executive Series, User Manual

Page: 22 / 42

18
User Code Authority Levels
Adding User codes:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any SELECT key. The keypad displays ADD DEL CHG.
4. Press the SELECT key under ADD to add a new user code.
(You must have a Master user level to add a user to the system.)
5. At the USER NUMBER: - prompt, enter a user number and
press COMMAND. The displays changes to CODE NO: - .
6. Enter a user code of 4 digits and press COMMAND. This is the
number the user will use each time they arm, disarm, or make
changes to the system.
User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
There are three characteristics associated with each user code:
10 3812 Master
User Number - Your system supports 64 users. Each user is
numbered from 1 to 64. This number identifies them to the system
and is transmitted to the central station (if your system is monitored)
when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into the
keypad when arming or disarming. This user code is kept secret from
other users and is not transmitted to the central station when they
arm or disarm.
A user enters
only their user code when operating the system.
Authority Level - The user is also assigned a level of authority
(Master, Standard, Limited, or Scheduled) by the person
administrating the system that determines the functions they can
access.
The Scheduled authority level only functions during a valid schedule,
except for arming which can be done at anytime. Disarming is
allowed outside of a schedule, but an “Unauthorized Entry” is sent
to the central station. All other authority levels function reguardless
of schedules.
The table to the right lists system functions users are allowed to
access based on the authority level assigned to their codes at the
time they are added to the system.
User number User Code
Authority level
User Menu
Sytem Options Scheduled Limited Standard Master
Zone Activity Check ✔ ✔ ✔ ✔
User Check-in ✔ ✔ ✔ ✔
Sensor Reset
✔ ✔ ✔ ✔
Display Events ✔ ✔ ✔ ✔
Door Access ✔ ✔ ✔ ✔
Arm and Disarm ✔ ✔ ✔ ✔
Alarm Silence
✔ ✔ ✔ ✔
System Test ✔ ✔ ✔
Zone Monitor ✔ ✔ ✔
Outputs On/Off ✔ ✔ ✔
Extend
✔ ✔
Bypass Zones ✔ ✔
Schedules ✔
Set Time ✔
User Codes
✔
Service Request
✔