Digital Monitoring Products XR40 Security Command Executive Series, User Manual

Page: 23 / 42

19
10. After you've completed making your selections, the keypad
display shows USER # ADDED.
11. Press the ARROW key once to add another user or twice to exit
the User Menu.
Deleting User codes:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays
ADD DEL CHG.
4. Press the SELECT key under DEL to delete a user code from
the system. You must have a Master user code level to be able
to delete a user code.
5. At the USER NUMBER: - prompt, enter the user number you
want to delete and press COMMAND. The displays changes to
USER # DELETED.
6. The display then changes back to USER NUMBER: - for you
to delete another user. Press the ARROW key twice to exit the
User Menu.
Changing User codes
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays
ADD DEL CHG.
4. Press the SELECT key under CHG to change a user code. You
must have a Master user code level to change a user code.
User Codes
continued
Note: If your system is using an access control reader, present the
new user's access device instead of entering a user code.
7. The display changes to LEVEL?.
8. Press any one of the SELECT keys. The keypad displays
MSTR STD LTD SCH.
9. Press the SELECT key under the authority level you are
assigning to the user code.
The following user code options can then be selected:
9a. TEMP CODE NO YES.
Temporary codes are ideal for guests or service technicians.
Select NO to make this a permanent user code.
Select YES to make this a temporary code. The keypad
displays TEMP DAYS: - . Enter the number of days (1 to
250) that a temporary user code can operate. Default is 7
days. Temp users are deleted from the system at 12:00AM
on the last day.
9b. AREAS: (Displayed in Area systems only).
Enter the area numbers where this user will have access.
For example: if you want this user to only have access to
areas 1 and 2, enter the numbers 1 and 2.
Once the correct area numbers are shown, press Command.
9c. ARM ONLY NO YES.
Select NO to allow this user to arm and disarm the system.
Select YES to restrict this user to arming only.
(The Arm Only user code can bypass zones not in a normal
condition at the time of arming.)
User Menu