System Setup
XR150FC/XR550FC User’s Guide
15
Changing User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Press the far right Select key, under CHG.
5. At the PROFILE NO: - option, enter a profile number and
press COMMAND. The display changes to PROFILE NAME.
6. Press any Select key to display -. Enter a profile name of up
to 16 characters. The default Profile Name uses the Profile
Number. Enter the name and press COMMAND.
7. At the Arm/Dis AREAS: option, enter the area numbers
(1-32) for arming and disarming assigned to this profile.
8. The keypad displays ACCESS Areas: . Enter the area numbers
(1-32) assignment to allow door access for this profile. Press
the COMMAND key.
9. The keypad displays OUTPUT GROUP: -. Enter the number
(1 through 20) for the Output Group assigned to this profile.
Press the COMMAND key.
10. The keypad displays each of the menus as shown in the Profile
Table. You then enable or disable the menu function for this
profile number. Select YES or NO and press the COMMAND
key to advance to the next menu selection.
11. When you complete Selecting all User Profile menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, in
dicating the profile is changed.
TEMP CoDE
When you select YES for
this menu option, and this profile is
assigned to a user code (see next section), the keypad displays
TEMP EXPIRE DATE:. Enter the ending date for the profile to
expire. Default is seven days from today. The system deletes
Temp users at 12:00 AM on the last date.
AnTI PASS no
Anti-
passback requires that you properly exit (egress) an area
previously accessed. When you fail to exit through the proper
location you cannot access it until you properly exit. Default is
No. See page 6 for more information.
ACCESS SCHEDULES
This option allows you to assign two Schedules to a profile for door
access. When the keypad displays FIRST ACCESS SCHEDULE:
- press COMMAND to browse available Schedules. Enter the
Schedule number and press COMMAND. When the keypad displays
SECOND ACCESS SCHEDULE: - repeat the same process for the
third through eighth access schedule and press COMMAND to
return to the User Menu.
RE ARM DELAY
RE ARM DELAY allows the entry of 0 to 720 minutes to be used to
delay automatic rearming when the user disarms an area outside
of schedule. If zero is selected, the rearming occurs based on
permanent programming in the panel.
RE ARM DELAY is also used to delay a late to close message to the
central station when the panel does not use automatic arming.
If the user has Extend Schedule authority, 2HR 4HR 6HR 8HR
displays at disarming. If the user does not make a choice, the RE
ARM DELAY is used to extend the schedule.
Application example: An exit door near the trash is scheduled
to be armed at all times. When the custodian needs to remove
trash, program 10 minutes for the activity. Or, an overhead door
only requires access when a delivery is made. Program up to 250
minutes to allow the loading dock supervisor to load or unload a
semi-truck.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Output Group browser and the Profile browsers.