6
XR150FC/XR550FC User’s Guide
Introduction
Special Fire Command Center Displays
As you use your system, you occasionally see a display that asks you
to enter a code or that describes a condition on the system. Below
are some examples of the displays:
ALARM
A 24-hour zone (for example fire or panic) or an armed burglary
zone has been tripped. Your system may sound bells or sirens.
ALARM NOT SENT (Burglary Keypad)
The alarm signal was not sent to the central station because a user
code was entered to disarm the system before the alarm signal was
sent to the central station.
ALARM CAnCELLED
(Burglary Keypad)
An Alarm Cancel signal was sent to the central station because
a user code was entered after an alarm was sent to the central
station.
SILEnCED
An Alarm Silence has been performed to turn off the notification
appliances. Zone names are displayed on the bottom line of the
keypad display.
SUPVSRY (SUPERVISORY)
A Supervisory type zone alarm has occurred. The zone name is
displayed on the bottom line of the keypad display.
TRoUBLE
There is a problem with a protection device or system component.
This display is accompanied by a description of the problem.
EnTER CoDE
The system requires you to enter your user code. User codes can be
required for turning your system on (arming), turning your system
off (disarming), and many other functions.
As you enter your user code, the keypad display shows an asterisk
(*) in place of each digit pressed. This keeps others from seeing
your user code on the display as it is entered.
TRY AGAIn or InVALID CoDE
The user code you have entered is not recognized by the system.
Check the user code and try again.
InVALID PRoFILE
All user codes have a profile that allow the user to only access
certain functions. When users attempt functions outside their
authority, the INVALID PROFILE message displays.
InVALID AREA
A user has attempted a door access for an area they are not
assigned.
InVALID TIME
A user code assigned to a specific schedule is entered outside of the
valid schedule. See Schedules and User Codes.
ARMED AREA
A user has attempted a door access to an armed area to which they
do not have arming and disarming authority.