CONNECTION SETTINGS
If no network cable is attached, thirty seconds
after power up the X1 broadcasts an SSID
of
DMPX1
followed by the controller’s serial
number. No password is required to join the
SSID.
Configure Options
1.
Connect to the X1 SSID using a device
capable of launching a browser (cell
phone, laptop, etc.).
2.
Enter
192.168.1.1
into the web browser.
3.
For Wi-Fi, in the
Wi-Fi
options, enter the customer’s network information. For
Network, the
DHCP
options, make edits to the desired fields.
•
DHCP: This option is toggled on as default.
•
Static IP: Toggle off DHCP and enter the information in the required fields.
4. Select
Apply
, and the X1 will reset.
Once the X1 has reset, it will automatically connect to the customer’s network with the
updated settings.
PROGRAM IN DEALER ADMIN™
Go to Dealer Admin (
) to program the controller.
TEST THE CONTROLLER
Make sure that the Reader LEDs are on and the Elevator Controller’s Power LED is on.
If connected to Wi-Fi, the Wi-Fi LED is on solid. If connected to network, the Network
Port light is blinking. For cell and all communication methods, check that the elevator
controller is communicating with Dealer Admin and Virtual Keypad after Dealer Admin
programming is completed.
The elevator modules each have ten onboard LEDs per floor relay. For visual
confirmation of the relay operation, the LEDs are on when the relay is on and off when
the relay is off.
More Information
Designed, engineered, and manufactured in Springfield, Missouri
.
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard Springfield, Missouri 65803-8877
800.641.4282 | dmp.com
|
Follow the QR code for the full Installation and
Programming Guide.
L
R
Wi-Fi LED