DIGITAL-LOGIC SM800/900DK Technical User'S Manual Download Page 8 | Manualshive

Page: 8 / 103

background image

DIGITAL-LOGIC AG

SM800/900DK Technical Manual V1.2B

8

1.9. Applicable Documents and Standards

The following publications are used in conjunction with this manual. When any of the referenced
specifications are superseded by an approved revision, that revision shall apply. All documents may be
obtained from their respective organizations.

Advanced Configuration and Power Interface Specification Revision 2.0c, August 25, 2003 Copyright

© 1996-2003 Compaq Computer Corporation, Intel Corporation, Microsoft Corporation, Phoenix
Technologies Ltd., Toshiba Corporation. All rights reserved.

http://www.acpi.info/

ANSI/TIA/EIA-644-A-2001: Electrical Characteristics of Low Voltage Differential Signaling (LVDS)

Interface Circuits, January 1, 2001.

http://www.ansi.org/

ANSI INCITS 361-2002: AT Attachment with Packet Interface - 6 (ATA/ATAPI-6), November 1, 2002.

http://www.ansi.org/

ANSI INCITS 376-2003: American National Standard for Information Technology – Serial Attached

SCSI (SAS), October 30, 2003.

http://www.ansi.org/

Audio Codec ’97 Revision 2.3 Revision 1.0, April 2002 Copyright © 2002 Intel Corporation. All rights

reserved.

http://www.intel.com/labs/media/audio/

Display Data Channel Command Interface (DDC/CI) Standard (formerly DDC2Bi) Version 1, August

14, 1998 Copyright © 1998 Video Electronics Standards Association. All rights reserved.

http://www.vesa.org/summary/sumddcci.htm

ExpressCard Standard Release 1.0, December 2003 Copyright © 2003 PCMCIA. All rights reserved.

http://www.expresscard.org/

IEEE 802.3-2002, IEEE Standard for Information technology, Telecommunications and information

exchange between systems–Local and metropolitan area networks–Specific requirements – Part 3:
Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical
Layer Specifications.

http://www.ieee.org

IEEE 802.3ae (Amendment to IEEE 802.3-2002), Part 3: Carrier Sense Multiple Access with Collision

Detection (CSMA/CD) Access Method and Physical Layer Specifications, Amendment: Media Access
Control (MAC) Parameters, Physical Layers, and Management Parameters for 10 GB/s Operation.

http://www.ieee.org

Intel Low Pin Count (LPC) Interface Specification Revision 1.1, August 2002 Copyright © 2002 Intel

Corporation. All rights reserved.

http://developer.intel.com/design/chipsets/industry/lpc.htm

PCI Express Base Specification Revision 1.1, March 28, 2005, Copyright © 2002-2005 PCI Special

Interest Group. All rights reserved.

http://www.pcisig.com/

PCI Express Card Electromechanical Specification Revision 1.1, March 28, 2005, Copyright © 2002-

2005 PCI Special Interest Group. All rights reserved.

http://www.pcisig.com/

PCI Local Bus Specification Revision 2.3, March 29, 2002 Copyright © 1992, 1993, 1995, 1998, 2002

PCI Special Interest Group. All rights reserved.

http://www.pcisig.com/

PCI-104 Specification, Version V1.0, November 2003. All rights reserved.

http://www.pc104.org

PICMG® Policies and Procedures for Specification Development, Revision 2.0, September 14, 2004,

PCI Industrial Computer Manufacturers Group (PICMG®), 401 Edgewater Place, Suite 500,
Wakefield, MA 01880, USA, Tel: 781.224.1100, Fax: 781.224.1239.

http://www.picmg.org/

Serial ATA: High Speed Serialized AT Attachment Revision 1.0a January 7, 2003 Copyright © 2000-

2003, APT Technologies, Inc, Dell Computer Corporation, Intel Corporation, Maxtor Corporation,
Seagate Technology LLC. All rights reserved.

http://www.sata-io.org/

«
...
6
7
8
9
10
...
»

Summary of Contents for SM800/900DK








































































































Reviews:

No comments

Related manuals for SM800/900DK

Brand: Particle Pages: 6

Brand: Barthelme Pages: 8

Brand: vacuubrand Pages: 12

Brand: Vacon Pages: 47

Brand: Vacon Pages: 40

Brand: J+J Pages: 4

Brand: Nemesis Pages: 6

NuMicro M252 Series

Brand: Nuvoton Pages: 38

SWD Starter Kit

Brand: ez-wheel Pages: 30

Brand: NELSEN WATER Pages: 16

Brand: Quicksmart Pages: 10

Brand: Aerotech Pages: 112

CY3280-20x66 Universal CapSense

Brand: Cypress Pages: 2

Brand: Pulsafeeder Pages: 24

Brand: Vector Pages: 649

Brand: SSK Pages: 8

Goldstart MPC2000

Brand: P&B Pages: 41

Compact GuardLogix 5370

Brand: Allen-Bradley Pages: 210

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands