DIGITAL-LOGIC SM800/900DK, Technical User'S Manual

Page: 17 / 103

DIGITAL-LOGIC AG
SM800/900DK Technical Manual V1.2B
17
3. S
YSTEM
P
REPARATION
3.1. Important Information
Warning, ESD Sensitive Device!
Place the embedded computer board on an isolated, ESD-protected surface. Also ensure that all
equipment, tools and people are fully protected against ESD.
Note…
1. The IDE cable connects both the hard drive and CD/DVD drive. Therefore, disconnecting
the IDE cable will disconnect both devices.
2. The floppy cable connects to a Micro-floppy drive.
Attention!
The smartModule must be firmly attached to the board with screws. Do not attempt to
power-up the system without taking this step or the system may not work and you risk damaging
the equipment! See Section 3.4.2 for photos and full description of how to assemble/disassemble
the smartModule.
3.2. Print Detailed Information from the CD
Note…
Place the Product-CD into the CD-Drive of a personal computer with a connected printer.
Open the CD; open the directory SM800-900DK.
Print out the following detailed manual:
The driver/software/BIOS manual: GEODE_LX800-900.pdf
The schematics, found in a separate file on the Product CD, may also be printed.