060*(XVHUPDQXDOYHUVLRQ
3U&
8.
Hardware installation
The following parts are required for the operation of
the M
•
PC/104 CPU board at least
PC/104-Plus "Bus-compatible"
•
Power
supply
•
Properly installed operating system like
MS-DOS 6.22, Windows 2000, Windows XP,
Linux
For installation it may be necessary to connect
pheripheral devices to the CPU board like
•
PS/2
keyboard
•
PS/2
mouse
•
Analog-VGA-monitor or LCD-monitor
Set the five jumper beside the PC/104+ connector
if necessary, the factory default setting work prop-
erly if only one M board is stacked
together with the MSM855. If several PC/104+
boards are stacked together each should use
different resources, see jumper table.
Map of the board
M Version 0.1
Plug the PC/104+ CPU board to the
M board. Take care to properly
align the connector before insertion, do not
force with power!
Jumper
pin default
value
signal
JP301
A
2er Jumper open
IDSEL#_0
B
2er Jumper open
IDSEL#_1
C
2er Jumper closed
Jumper IDSEL#_2
D
2er Jumper open
IDSEL#_3
JP302
A
2er Jumper open
REQ#_0
B
2er Jumper open
REQ#_1
C
2er Jumper closed
Jumper REQ#_2
D
2er Jumper open
REQ#_3
JP303
A
2er Jumper open
GNT#_0
B
2er Jumper open
GNT#_1
C
2er Jumper closed
Jumper GNT#_2
D
2er Jumper open
GNT#_3
JP304
A
2er Jumper open
INT#_0
B
2er Jumper open
INT#_1
C
2er Jumper closed
Jumper INT#_2
D
2er Jumper open
INT#_3
JP305
A
2er Jumper open
CLK_0
B
2er Jumper open
CLK_1
C
2er Jumper closed
Jumper CLK_2
D
2er Jumper open
CLK_3
