Digital ID View IP Camera User Manual Download Page 46

Page: 46 / 56

12000 Ford Road, Suite 110

Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291

www.idview.com

【

IR_CUT

】

can choose automatically switch or IR synchronous switch, default is automatically

switch

【

Mirror image

】

tick

，

means enable the convert of left and right of monitoring page

【

Over turn

】

tick

，

means enable the convert of up and down of monitoring page.

【

Anti-flicker

】

tick

，

enable anti-flicker to the fluorescent light.

【

Front-end Command

】

fill in command and send out, front end of IP camera will carry out this

command

4.5 Advanced

Advanced menu including

：

HDD manage

、

Account

、

Auto Maintain

、

Default

、

Import & Export

、

Upgrade

、

Reboot

4.5.1 HDD manage

To configure TF card that installed in device. Menu shows the information of current TF card,

including: type, status, total capacity. Operation to TF card including: set Read/Write, Read only,

Redundant, Format disk, Recover, Partition, etc. Select the TF card, then click function button on the

right side.

Remark

：

Read/Write

：

can read data and also can write data into it

；

Read only

：

only can read data from the disk, but can not write data into it.

Summary of Contents for IP Camera

























































Search results

Summary of Contents for IP Camera

Reviews:

Related manuals for IP Camera

Brands by name

Popular brands

Digital ID View IP Camera, User Manual

Search results

Summary of Contents for IP Camera

Reviews:

Related manuals for IP Camera

Brands by name

Popular brands