Time Zone
– press
+/-
buttons to select the time zone for the system. Please refer to
Appendix C
for the time zone table.
Daylight Saving Time
– press
ENTER
to check/uncheck this item. The default value is
set by selecting a different time zone, but the user may check/uncheck this item if the
default setting is checked.
System Time
–
Synchronization
– time synchronized with TSP Server or not. Press
ENTER
to
check/uncheck this item. The default setting is “
–
” - unchecked.
TSP Server
– TSP (Time Synchronization Protocol) server name if Time
Synchronization is enabled. The system will try to do time synchronization with the
specified TSP server at the system preset interval. Please follow the Text Input
method described in
Section 4.1
to modify this item.
Date
– system date. Press
+/-
buttons to modify each of these items.
Time
– system time. Press
+/-
buttons to modify each of these items.
Display Format
– format used for the system time displayed on the lower-left corner
of the main screen. Press
+/-
buttons to select the desired format.
Language
– press
+/-
buttons to select the language for the system. The languages
supported include:
Simplified Chinese
,
Russian
,
English
,
ITALIAN
, etc.
Protection Key
– the protection key for the remote access of the system. Please follow
the Text Input method described in
Section 4.1
to modify these items.
Note: This protection key will be used for authentication when any remote station wants
to connect with the system from Ethernet interface, either LAN or internet. So, the
same protection key must be entered to install the remote software if it is to be used
to access the system.
51