Digital Equipment VGB25, Installation And Operating Information

Page: 2 / 51

January 1995
FCC ID: A09-VGB25
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. Any changes or modifications made to this equipment may
void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio and television reception; however, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ADDS is a trademark of Applied Digital Data Systems, Inc.
IBM, ProPrinter, and PS/2 are registered trademarks of International Business
Machines Corporation. Kensington is a registered trademark of Kensington
Microware Limited. SCO is a trademark of Santa Cruz Operations, Inc. TVI is
a trademark of TeleVideo, Inc. UNIX is a trademark of X/Open Company Ltd.
WY and WYSE are registered trademarks of Wyse Technologies.
The Energy Star emblem does not represent EPA endorsement of any product or
service. A monitor with a ferrite core on the video line may be used with the VGB25.
All Rights Reserved.
Printed in Taiwan.
This document was prepared using VAX DOCUMENT Version 2.1.