2.3 Selecting the SCSI Address
To familiarize yourself with the TLZ07 drive and TLZ7L loader:
1.
Refer to Figure 1–1 and Figure 1–2 for the location of the buttons, switches,
and connectors on the tabletop drives and Figure 7–3 and Figure 7–4 for
the tabletop loaders.
2.
Note that all connections are made at the rear of the tabletop enclosure.
Your system uses a SCSI ID switch to identify, or address, the drive. The SCSI
ID is factory set at 0. If you are installing the drive on a system that is already
using SCSI ID 0, use any available SCSI ID. (You may have to consult your
system manager.)
To set/change the SCSI address:
1.
Locate the SCSI address switch at the rear of the tabletop enclosure.
2.
Select the SCSI address for the drive:
•
TLZ07-DA — Press the + or - button until the desired address (0
through 7) appears in the window. See Figure 1–1.
•
TLZ7L-DA — Set the switches according to Table 7–6 and Figure 7–4.
NOTE
If you are installing any other drive variant, refer to Chapter 3.
Turn off all power before connecting the cables and the terminator.
The drive must be turned off and then on for switch settings to take
effect, or a SCSI bus reset must be received.
2–2 Installing the Tabletop Drives/Loaders (TLZ07/TLZ7L)
